![]() |
高比重钨合金加重杆 钨钢加重杆 优质钨合金 高比重加重杆 耐腐蚀 |
![]() |
|
牌号规格:定制 | |
品 牌:金伯仕 | |
产 地:湖南株洲 | |
![]() |
|
产品简介: | |
高比重钨合金加重杆特别适汽车配重件,还能加工成模具以及各种配重件,例如快艇配重件,车辆配重件,飞机配重件,直升机配重件,船用配重件,等等。 |
高比重钨合金加重杆材料的特性
-比重大:一般比重为16.5-18.75g/cm3
- 密度比铅高65%.
- 密度比铁高130%.
- 力学性能高,可适应动态或静态安装
- 弱铁磁性.
- 铅的替代品.
- 无毒.
- 抗腐蚀.
- 易加工.
- 可和其他材料配合使用
高比重钨合金加重杆产品详情:
1)比重大:一般比重为16.5-18.75g/cm3;
2)强度高:抗拉强度为700-1000Mpa;
3)吸收射线能力强:比铅高30-40%;
4)导热系数大:钨合金的导热系数为模具钢的5倍;
5)热膨胀系数小:只有铁或钢的1/2-1/3,
6)良好的可导电性能;无因为其良好的导电性能而广泛应照明和电焊行业
7)具有良好的可焊性和加工性。
8)株洲精钻可按您的要求生产各种形状、尺寸规格高比重合金。
高比重钨合金加重杆的规格
1. 直径:2.0-100.0mm
2. 长度:50-1000mm
3. 密度:16.5-18.75g/cm3
4. 成分:钨含量:85-99%,W-Ni-Fe,W-Ni-Cu
5. 表面:烧结态,车光表面,磨光表面
Tungsten Alloy Cylinder Specification
1. Diameter: 2.0-100.0mm
2. Length: 50-1000mm
3. Density: 16.5-18.75 g/cm3
4. Composition: W content: 85-99%, W-Ni-Fe, W-Ni-Cu
5. Surface: Sintered surface, Forged surface, Ground surface
高比重钨合金加重杆的用途
钨合金棒特别适汽车配重件,在模块上钻一个或者多个直径为25/64或者更大直径的洞,再填入所需数量的钨合金圆柱。然后将一个3/8 英寸长的销杆插入洞口。该产品还能加工成模具以及各种配重件,例如快艇配重件,车辆配重件,飞机配重件,直升机配重件,船用配重件,等等。
Applications for Tungsten Alloy Cylinders
Tungsten alloy cylinders can be easily used for car weighting by drilling one or more 25/64"or larger diameter holes into the block and then inserting the desired number of cylinders. The hole can then be plugged with a piece of 3/8 inch dowel rod. The product also is manufactured as the parts of military defense, extrusion die, various counterweights, such as yacht counterweights,vehicle counterweights, airplane counterweights, helicopter counterweights, boat counterweights,tank counterweights, etc.Usually, tungsten alloy cylinder could be manufactured as the parts for military applications,extrusion die and various kinds of counterweights.
更多高比重95钨镍铁石油加重杆产品相关信息,可以关注株洲精钻官网
欢迎来电垂询,我们将尽心为您提供所需产品信息资讯。
购买钨基高比重产品,请找株洲精钻。
可根据您的要求来图来样生产定制各类硬质合金制品!